SWORD THINNING 30

The supple cutting quality of these scissors not only gives a more natural finish, but lets you experience its fine quality.

Cut ratio : regular/10% reverse/10%
Use : TEXTURE CONTROL 3~10%
Material : Extramarise II Cobalt Alloy
regular/10%Blade length : 60mm
[Bottom blade] Ring size:horizontally/18mm・vertically/19mm
[Top blade] Ring size:horizontally/17mm・vertically/19mm
Product number : #102075
reverse/10%Blade length : 60mm
[Bottom blade] Ring size:horizontally/18mm・vertically/19mm
[Top blade] Ring size:horizontally/17mm・vertically/19mm
Product number : #102078

SWORD series, thought thoroughly about your hand.

These are medically good scissors developed with an ergonomic design aimed at preventing wrist/carpal tunnel issues. We have reconsidered the location of the thumb-which is shorter than the other fingers-to make these scissors easier on the hands, locating the finger holes in the most natural place. Furthermore, to reduce strain on the gand, we have used a carbon resin bearing and titanium-plated wave washer. Whether you are troubled by wrist/carpal tunnel issues or whether you have never had any concerns about your hands, it is important for long-term use to choose a tool that will reduce the burden on your hand.
EXTRAMARISE
EXTRAMARISE
EXTRAMARISE® is a proprietary heat treatment ideally suited for haircutting scissors that was developed by MIZUTANI based on long years of accumulated data and experience. The same steel material can have totally different performance depending on the heat treatment used. Therefore, to maximize the special qualities of the rare metals (cobalt, molybdenum, vanadium, etc.) we’ve added to our products to the greatest extent possible, and achieve the ideal metal for scissors, (*hardening, tempering, sub-zero processing) and other complete temperature management procedures are essential. To bring out the distinct characteristics of materials, and manufacture a blade with the ultimate strength required for haircutting scissors, we at MIZUTANI have implemented our own proprietary heat treatment using the ideal temperature for scissors: EXTRAMARISE® processing.
CARBON RESIN BEARING
CARBON RESIN BEARING
The bearings made of carbon-contained resin is used that is excellent in friction and abrasion, and several pieces are mounted inside the pivot screw, to produce the even and smooth feelings in opening and closing the blades.
RESIN BEARING
RESIN BEARING
These bearings are made by shaving each of them one by one, using a resin material with excellent mechanical properties. Their smoothness and flexibility makes for an ideal cutting experience, and protects the scissors and screws from wear and tear. Our bearings are gentle to both our scissors and their users.
ORGANIC DESIGN
ORGANIC DESIGN
The handles are so designed that they look nonmetallic, alive and organic. You may feel some warmth from the three-dimensional, twisted handles, and once touched, you would not like to part them from your hand.
DISK DRIVER
DISK DRIVER
Compact and easy to turn, this is a flat type driver for UFO screws. This screwdriver is included with all scissors with the mark shown.
* SWORD D-17/D-19, SWORD THINNING, SWORD+wood, SWORD+carbon is registered design patent in Japan.
* trademark of MIZUTANI SCISSORS is registered trademark of MIZUTANI SCISSORS in Japan.